However, the remaining ink amount cannot be detected properly, so the function to detect the remaining ink amount does not operate.Ĭheck if the document is placed in the correct orientation / position and try the operation again. Press the or button, to clear the error and continue printing without replacing the ink cartridge. The ink level cannot be correctly detected.Ī used ink cartridge may be installed, or the ink cartridge is empty. Re-connect the cable between the camera and the machine.Īn unsupported ink cartridge may be installed. There may have been no response from the camera for the prescribed time. Please refer to the camera instructions for more information about procedures required before and after connection to the machine.ģ. This is required before printing for some cameras that support PictBridge. Set the camera in PictBridge print mode before it is connected to the machine. If the camera does not support either one, the machine cannot print directly from the camera.Ģ. Confirm that the camera you are using supports PictBridge or Canon Bubble Jet Direct. The machine cannot communicate with the connected camera.ĭisconnect the cable between the machine and the camera to clear the error.Ĭheck the following items, then try printing again.ġ. A specified period of time has elapsed without receiving a response from the digital camera. A print mode compliant with PictBridge is not selected.
The waste ink absorber is a part inside the machine, which absorbs ink used in the cleaning operations.Ī specified period of time has elapsed without receiving a response from the digital camera. If the waste ink absorber becomes full, printing will not be possible. Printing can continue until the waste ink absorber becomes full. Press the or button to clear the error and continue printing.
Canon mp160 scanner not printing clear install#
Install each ink cartridge in the proper position. The ink cartridge is not installed in the proper position. The ink cartridge is not installed in the appropriate position.
If one of the ink cartridges is missing, this error can occur. Make sure to install ink cartridges even when you set the machine to use only one ink cartridge in printing. The ink cartridge may not be installed properly, or an unsupported ink cartridge may be installed. The ink cartridge(s) cannot be recognized. Printing with an empty ink cartridge may cause the machine to malfunction. Confirm the maximum number of sheets in the auto sheet feeder is within the paper limit mark.Īfter printing completes, replace the empty ink cartridge. Confirm only recommended paper is installed. Confirm there is no foreign material inside the machine.Ģ. If paper jams frequently occur, check the following:ġ. Clean the paper feed roller to resolve the error. Confirm the maximum number of sheets in the auto sheet feeder. When paper is installed, check each of the following items and try printing again.ġ. If paper is not installed, load it and then press the or button. Take the appropriate action to clear the message.Įx. LED Errors When an error occurs, the error displays on the LED.
0 kommentar(er)
